chiligrinder.com

FAQ’S

Home » FAQ’S

Putting one by one onion on onion ends cutter by hand is really a work, can we have some easier alternative? Because to ensure onion ends cutting machine good cutting effect, it really need one workers to help adjust each onion position, there can be a lifting conveyor with hopper to convey up each onion , and then it will be a little easier for workers just adjust position, no need to put on one by one.  

Putting one by one onion on onion ends cutter by hand is really a work, can we have some easier alternative? Because to ensure onion ends cutting machine good cutting effect, it really need one workers to help adjust each onion position, there can be a lifting conveyor with hopper to convey up each onion , and then it will be a little easier for workers just adjust position, no need to put on one by one.

Yes, this onion root cutting machine is designed automatically cutting the top and tail of each coming onion from the convey belt. The blades will be automatically adjust the gap, and this not means it can process each size, it has some range limit, such as usually ok for one breed of onion,30-50mm,60-100mm,80-120mm,etc.

Please refer following pictures for the chilli grinding machine sieve installation steps, if you put sieve directly on the part, you will find it length not enough, but you need firstly put it on the place and then drag the other side to the bottom, then use screw to fasten, this will pull the sieve the good tension for sieving chili powder.

Belt pulley, belt, gear, blade.These are easy to be bought or customize produce at your local, you can also prepare additional quantity as back up.

The moisture content below 15% is OK,It is not like the hammer crusher, which require 10% maximum.If raw material is fresh chili and paprika, need drying by sunshine or drying machine.

This machine can be used for roasting different dry granular materials, and spice, seeds, nuts, etc no problem, the drum can be 1,2,,3,4,5, you can put same material or different. We also have more large capacity continuous roasting machine except this batch roaster.

Our machine is thermal radiation heating type, it is better than heat conduction of no holes drum, the heat conduction no hole burner is more closer to drum ,and actual drum temperature is much higher than thermal radiation one, such as 450 and 220 centigrade degree,so if material inside drum happen to stay long time in a place, the common heat conduction roaster will burnt material in some way

Yes, this machine only depends on chili stem diameter, same range diameter all can be processed by one same machine, not matter how long chili is, and which breed is.

The whole unit chili grinding machine include feeding trolley, feeding auger, hopper, grinder, sieve,cyclone collect, return back auger,all SS201, have manual or automatic control roller gap two types. This is roller type grinder, which can keep good of spice color and taste, suitable for chili, turmeric, pepper, cumin, coriander, etc, these similar spices which oil content is not very high.It is also OK for mixed spices, masala, curry powder, etc.

We have dust remover port on the grinder; you can fix a dust remover bag cloth on the port, or lead this port out of the workshop. If for whole production line, it is necessary to install one separate pulse dust collector to prevent the environment. It is automatically impact the filter bag and only open the bottom value to collect after some days.

1) according to final quotation offer, seller send buyer the proforma invoice with stamped. 2) buyer pay the 30% deposit by T/T 3) seller arrange whole plant design and manufacturing 4) after finish,quality check, empty run of the machines,send buyer the pictures 5) pay the balance 70% before delivery 6) arrange shipping with sea forwarder 7) seller ask shipping container to factory and loading there and deliver to sea port warehouse 8) custom declaration, release and then shipping period 9) goods arrive buyer port, custom clearance, fetch goods.

Page 1 of 212